| COMPONENT |
RESULT |
| 1. Ash content, not more % |
0.1 |
2. Mass fraction of sulphur, not more %
- low - sulphur - residual - oil |
0.5 |
3. Temperature of the flash, not less °C
in the closed crucible |
|
| In the open crucible °C |
110 min |
| 4. The temperature of solidification, not higher °C |
25 |
| 5. Kinematics viscosity at 50 °C |
118 max |
| 6. Water content |
0.5% |
| 7. Mechanical impurities |
Lower than 0.1% |
| 8. Acidity |
Lower than
5 mg KOH/ 100ml |
| 9. Alkalinity |
nil |
| 10. Gross Calorific Value Kcal/kg / KJ/kg |
Min9200/41300 |
| 11. Density at 15.0 deg. C Kg/l |
0.880-0.9200 |
| 12. Hydrogen Sulfide Content (H2S) pom |
0.5 max |
| 13. Carbon Residua |
Lower than 7% |
| 14. Vanadium (V) ppm |
30 MAX |
| 15. Aluminium (Al) ppm |
5 |
| 16. Silikon (Si) ppm |
12 |
| 17. Nickel (NI) ppm |
49 |
| 18. Asphaltenes m/m |
3.6% |
| 19. Destilation @4 mm Hg |
|
| Extracted to 760 mm Hg |
|
| Initial Boiling Point deg. C |
216 |
| 5% recovered deg. C |
259 |
| 10% recovered deg. C |
310 |
| 20% recovered deg. C |
358 |
| 30% recovered deg. C |
445 |
| 40% recovered deg. C |
502 |
| 50% recovered deg. C |
534 |
| 60% recovered deg. C |
538 |
| 75% recovered deg. C |
545 |
| 80% recovered deg. C |
- |
| 90% recovered deg. C |
- |
| Final Boiling point deg. C |
550 |
| Percent Recovered vol |
78% |
| Residue vol |
22% |
| Total Nitrogen m/m |
0.192% |
| 20. Sodium (Na) ppm |
15 |
| 21. K ppm |
40 |
| 22. Ca ppm |
10 |